AC/DC CURRENT SENSOR CT6862-05

Delivering Wide-Operating Temperature Range and High-precision Current Measurement

Hioki pass-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6862 is a DC to 1 MHz/50 A sensor, and this is ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc.

CAT III 1000 V

Use with an instrument with a high input impedance of 1 MΩ or higher.

Key Features

  • Combined accuracy with HIOKI power analyzer PW8001, PW6001 and PW3390 is specified. For details of combined accuracy, refer to the instruction manual.
  • Wide-bandwidth DC to 10 MHz excellent frequency characteristics
  • Applications in the fields of electric and hybrid electric vehicles
  • Wide operating temperature range(-40°C to 85°C) fit for automobile applications
  • Ideal for evaluation of solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters
  • For observing waveforms to be used with the oscilloscopes or Memory HiCorders (use with Sensor Unit)

Model No. (Order Code)

CT6862 Discontinued, 50 A AC/DC, PL23 terminal
CT6862-05 50 A AC/DC, ME15W terminal

Ideal for comprehensive evaluation of wide-bandwidth and high-precision inverter motors

The CT6862 series are wide-bandwidth and high-precision AC/DC current sensors that achieve high accuracy measurement of both small- and large-current signals. They can be used for a wide variety of applications in the fields of electric and hybrid electric vehicles, inverters and other devices, alternative energy sources such as solar power and fuel cells, as well as home electronic appliances and system equipment.

Basic specifications

Accuracy guaranteed: 1 year
Rated current 50 A AC/DC
Max. allowable input Within the derating range, up to ±150 A peak (design value) allowed at 40°C or less for 20 ms or less
Frequency bandwidth Amplitude: DC to 10 MHz
Phase: DC to 1 MHz
Basic accuracy DC (±0.03% rdg. ±0.002% f.s., no phase specification)
45 Hz ≤ f ≤ 66 Hz (±0.03% rdg. ±0.007% f.s., ±0.05°)
Specified up to 1 MHz
Output voltage rate 40 mV/A rated (This device outputs AC+DC voltage via the Sensor Unit)
Max. rated voltage to earth 1000 V CAT III
Core diameter φ 24 mm (0.94 in)
Operating temperature, humidity -40°C to +85°C (-40°F to 185°F), 80% RH or less (with no condensation)
Power supply Power suppled via the Power Analyzer PW8001, PW6001, PW3390, Sensor Unit CT9555, CT9556, CT9557, or 3CH CURRENT UNIT U8977
Max. rated power 4 VA max. (at 50 A/55 Hz, ±12 V power requirement)
Dimensions and mass 70 mm (2.76 in)W × 100 mm (3.94 in)H × 53 mm (2.09 in)D, CT6872: 370 g (13.1 oz), cable length: 3 m (9.84 ft), CT6872-01: 690g (24.3 oz), cable length 10 m (32.81 ft)
Included accessories Instruction Manual ×1, Mark bands ×6, Operating Precautions ×1

Compatible models

Compatible models CT6872
Power Analyzer
PW8001, PW6001, PW3390
OK
Power Analyzer
3390
Attention (Requires CT9901)
Power HiTester
3193 series
Attention (Requires CT9901)
Current Unit
8971
Attention (Requires the 9318, CT9901)
3CH Current Unit U8977 OK

External power supply, connection cord (5)

Options B (1)

Cannot be used in combination with the 9277, 9278, 9279.

Conversion cable/extension cable (3)

The CT9902 connects up to 2 cables in series (Accuracy addition required)
9318: For connection to Current Unit 8971

Options D (1)

For connecting to the F/V Unit 8940 or Current Unit 8971


Related Products